February 23, 2007

Heated AOA/Pitot Probe Now Shipping!

Heated AOA/Pitot Probe Now Shipping!

Dynon Avionics is pleased to announce the much-anticipated heated version of its popularAOA/Pitot design. This all-new design integrates a nichrome heating element into a pitot that is the same form factor as the unheated version. This approach preserves the original wind tunnel tested aerodynamic angle of attack design and facilitates replacement of Dynon's unheated AOA/Pitot for all those seeking added protection.
The heated AOA/Pitot includes a separate pitot heater controller that regulates the power to conserve energy and prevent dangerous temperatures. The controller also outputs a signal that can be wired to a warning light in the cockpit to indicate an inoperable or switched-off pitot heater.
Dynon is accepting orders beginning February 23, 2007. The part number for the Heated AOA/Pitot is 100677-000. The price is $450 and represents an excellent value when compared to other heated pitots and is still significantly less than competitive AOA systems.
You may place your order via our online store or by phone at (425) 402-0433.

January 9, 2007

Brighter Screen Options

Brighter Screen Now Standard

Dynon now offers an 800-nit bright screen as the standard for its EFIS-D60, EFIS-D100, EMS-D120 and FlightDEK-D180 systems. The enhanced sunlight readability, 854 x 480 resolution, and night-dimming capability deliver impressive performance.
The rated 800-nit brightness is double that of our previous screens supplied with 400-nits. Since the eye perceives brightness on a log scale against energy, the output does not appear twice as bright. But, does deliver noticeably greater brightness under both standard and bright ambient conditions.
Part numbers and pricing are as noted in the table below.
InstrumentPart NumberRetail Price
EFIS-D60 With SuperBright Screen101225-000$1900
EFIS-D100 System with SuperBright Screen100533-001$2600
EMS-D120 System with SuperBright Screen100566-001$2200
FlightDEK-D180 System with SuperBright Screen100565-001$3400
If you own an older 100-series product with a 400-nit screen, it can be upgraded for $400 plus shipping. To initiate an upgrade, please call our office at (425) 402-0433.

Australian Government Approves Dynon's Instruments

Australian Government Approves Dynon's Instruments

The Australian government Civil Aviation Safety Authority (CASA) recently released a letter stating that all of Dynon's EFIS and EMS systems may be fitted as non-required equipment in certified aircraft. While it cannot replace an existing required instrument or display, it may be installed as a backup instrument as long as it does not contravene the design standard of the certified aircraft.
Dynon is very excited to see the progressive view of the Australian government. We believe their position largely coincides with that of the vast majority of pilots and aircraft owners we have visited with over the past few years who see great value in using our equipment as backup instrumentation.
Dynon's Australian representative, Tony Brand from Horsham Aviation Services, has noted what a great development this represents to enhancing safety and also saving his customer's costly repairs. Having replaced many failed mechanical gyros over the years, he feels the Dynon's solid-state EFIS systems will greatly enhance safety as backups to the traditional attitude instruments. He also noted a particular instance where Dynon's EMS-D10 engine monitor detected an engine problem that had previously gone undetected. This finding ultimately saved the aircraft owner many thousands of dollars.
It remains to be seen whether the FAA will someday agree with CASA's position. The recent major concessions to the traditional certification methods for Light Sport Aircraft which accept non-certified avionics for VFR operations together with CASA's recent announcement may be an early signal of change for the future. Only time will tell.

Dynon Takes Flight in Van's New RV-12

Dynon Takes Flight in Van's New RV-12

Van's Aircraft's new RV-12 outfitted with Dynon's FlightDEK-D180 went for an uneventful flight on November 9, 2006. With President Richard VanGrunsven at the stick, the RV-12 test flight video revealed what appeared to be a very smooth and relaxing test flight.
Dynon collaborated with Van's Aircraft designer Ken Krueger for well over one year prior to this initial test flight. The FlightDEK-D180 design is a perfect match for this type of aircraft and in line with Van's philosophy of delivering great value.
We congratulate Van's Aircraft on this accomplishment and wish them all the best as they move towards releasing the RV-12.

No Price Increase for 2007

No Price Increase for 2007

Dynon, in its continuing effort to hold costs down, is pleased to announce that there are no price increases on any of its products going into the 2007 season. Our philosophy to keep our avionics affordable remains at the forefront of our operations and decision-making process.

July 10, 2006

New Features for All Products - July 2006

New Features for All Products

July, 2006
After much hard work by the programmers and beta testers, Dynon is proud to release new firmware for all of our currently shipping products, including the EFIS-D100, EFIS-D10A, EMS-D120, EMS-D10, and FlightDEK-D180. With this free, in-field firmware update, Dynon continues to enhance our products' functionality while maintaining the stability and ease of use that you have come to expect from us.
The major functionality that this firmware release adds is a directional gyro display on our EFIS products. The DG looks like a standard mechanical DG with a full 360 degree heading circle, but as with all things Dynon, it's better. The numbers are always upright, it won't lead or lag in a turn, it never needs to be set, and it includes a settable bug and markers every 45 degrees. If you have a D100, you can bring this up next to a 2/3 EFIS display and use both at the same time. On a D10A, you'll need to switch between the EFIS and DG displays. As before, if you have a Dynon EMS and a Dynon EFIS, you can display EFIS information on the EMS , including the DG. It's totally up to you how you want the information displayed on the screens in your aircraft.
This firmware update also introduces the initial implementation of the Dynon Smart Avionics Bus (DSAB). This is a network between units that allows them to share information and screens across a simple two wire interface. The DSAB hardware is built into every Dynon instrument since the EFIS-D10A so you can enjoy the benefits of this network with a simple firmware update. This first implementation of DSAB allows you to see EMS information on your EFIS. Given our current support of the EFIS displayed on the EMS (via a standard RS-232 connection), you may now display an EMS on an EFIS, an EFIS on an EMS, or even an EMS and EFIS side-by-side on the same screen. The display configuration is totally up to you.
There are a few things we'd like you to know about this firmware update:
  1. We don't have the manuals completed yet. In following with Dynon's design philosophy, we've done our absolute best to make everything on the product self-explanatory, but we're sure you'll have some questions. If you do, please ask them on our support forum in either the EFIS or EMS new features threads and we'll do our best to help. For now, this firmware is not being included in shipping products until the manuals are completed, so if you have a shiny, brand new Dynon product and want to see all the cool stuff, you'll need to update your firmware.
  2. The behavior of the outer buttons on the EFIS-D100, EFIS-D10A, and EMS-D10 has changed. These buttons now scroll through pages if you tap them. The left button still powers down if you hold it. The right button, when held for two seconds, brings up the screen configuration menu. The four inner buttons bring up the menu just like you remember. If you have a D120 or D180, you are already familiar with this; if you don't you may want to look at the quick start guide. Note that the EMS-D10 combines the Aux and Times pages into one screen.
  3. If you want to use the EMS on EFIS DSAB link, you may need to hook your products together. It's pretty simple- hook the “DSAB A” line on each product together and the “DSAB B” lines together. Don't cross A-B and B-A. If you have more than two products, just hook all of the “DSAB A” lines together and all of the “DSAB B” lines together. You can hook as many products up as you would like by just joining all the lines together. The EMS even makes this easy by having two “DSAB A” and two “DSAB B” ports.
  4. You'll still need to hook the EFIS RS-232 TX line to the EMS RS-232 RX line if you wish to see the EFIS on the EMS . We'll be getting rid of this requirement in a future firmware update, but for now, you'll need to keep this jumper.
This version of Dynon product firmware has been superseded by a version released in October 2006. 

Changelog

  • DG display (1/3 split-screen on 100 series, full-screen on 10 series)
  • EMS screens on EFIS D100/D10A (with DSAB connection from EMS )
  • Timers page on EFIS products
  • Contact input displays on the EMS
  • Audible AoA Alarm on all EFIS products
  • Fast page switching on EFIS products
  • EMS OAT can be used on EFIS products (over DSAB) for DA/TAS calculations
  • Fuel remaining can go negative (in case you forget to reset)
  • Altitude in feet or meters
  • Better support for two cylinder engine measurements (EMS)
  • Countdown timers stored between power cycles
  • More reliable EFIS to EDC communications
  • EMS will stay on during engine crank (down to about 8V)

April 21, 2006

2006 Sun 'N Fun Report

2006 Sun 'N Fun Report

The 2006 SNF Airshow was another great experience and one we at Dynon truly enjoyed. The excellent weather, spectacular airshow and new aircraft on display all contributed to our excitement.
Our 3-person crew was kept quite busy throughout the entire show demonstrating our expanding product line and answering questions. Our revised demo instrument panels were equipped with all 5 instruments that we now offer. We are quite proud of the fact that we've shipped three new products (EFIS-D100, EMS-D120 and FlightDEK-D180) over the past 6 months. Our engineers and production workers have been extraordinarily busy and we see no rest ahead. We've come a long way from our first product and airshow.
It was also thrilling to see so many Dynon products installed in the aircraft on display throughout the airshow. Many visitors to our booth commented on this fact as well. The affordable nature of our glass cockpit avionics are attracting many aircraft designers and dealers towards offering our systems as upgrade options. While we might logically be driven to believe that our state-of-the-art avionics are only suited for modern aircraft, we are often amused to discover them in unexpected cockpits ranging from old biplanes, cubs and even a flying B25 bomber!
One of the highlights of the airshow was the truly spectacular performance of the F-22 Raptor fighter jets as they made their very first public debut. It was impossible to escape noticing the incredible power and noise as they made their high speed, low altitude passes. We all marched to the far end of the field to get a good look at these incredible aircraft. We'd, of course, hoped to peer into the cockpit to see what sort of nifty instrumentation they had on board but the armed guards persuaded us to keep back a comfortable distance. Nevertheless, they were pretty awe-inspiring and surprisingly large. They are especially large when compared to the P51 that they flew alongside during part of the airshow.

Competing for attention with the Raptors was another reptilian ground-based bird. This craft was clearly intended for those who just couldn't get enough cockpit time in the skies.
We want to express our appreciation to all those who dropped by our booth. We hope we answered all your questions and allowed some hands-on time with our instruments. Thanks too to all those we met with while we toured about the grounds and flight line.
It is often said of those attending airshows that they are simply the best people you could ever associate with. We'd have to agree and this year's group was no exception. The SNF air show is among our favorites and we look forward to 2007 and even more great memories ahead.